Shotgunmicrofoon, ideaal voor toepassing op videocamera's. Maximale onderdrukking van zijgeluid dankzij de sterke richtingsgevoeligheid. Het "low-cut"-filter minimaliseert windruis. Zeer sterke onderdrukking van constructiegeluid.
The MKE 600 is the ideal video camera/camcorder microphone able to handle even demanding filmic challenges. Due to its high directivity, the MKE 600 picks up sounds coming from the direction in which the camera is pointing and effectively attenuates noise coming from the sides and rear. The switchable “Low Cut” filter additionally minimizes wind noise.
Because some video cameras/camcorders do not provide phantom power, the MKE 600 can also be battery powered. A battery on/off switch prevents the battery from discharging prematurely; “Low Batt” is displayed.
Maximal rejection of side noise
Switchable "Low Cut" filter minimizes wind noise
Phantom or battery powering
Battery switch with "Low Batt" indicator
Rugged all-metal housing
Very good suppression of structure-borne noise
Supplied with foam windshield and shock mount
diameter 20 mm, length 256 mm
40 Hz to 20 kHz
132 dB SPL at P48; 126 dB SPL with battery powering
128 g (without battery)
Gevoeligheid in vrij veld, geen belasting (1 kHz)
21 mV/Pa at P48; 19mV/Pa with battery powering
15 dB (A) at P48; 16 dB (A) with battery powering
approx. 150 hrs
48 V +/- 4V (P48, IEC 61938) or battery/rechargeable batt. 1,5V/1,2V AA size
Yes. The MKE 600 has a standard XLR connection. Sennheiser offers a specialized cable (KA 600i) that is designed specifically to match the wiring configuration utilized by Apple devices.
How does the MKE 600 connect to my recording device?
The MKE 600 has a standard XLR connection. If you are connecting to a recording device like a camera with a 3.5mm MIC input then you would use the Sennheiser KA 600 cable. If you are connecting to a recording device with an XLR MIC input then you would use a standard XLR to XLR audio cable.
Why does the LED on my MKE 600 come on briefly and then go off?
The power indicator light on the MKE 600 is designed to come on briefly to indicate that the microphone powered on but then the LED goes out to conserve battery power.
What should I do if the LED on my MKE 600 remains lit up?
If the LED power indicator remains lit that indicates a low battery and the battery should be changed.
How long will the battery of the MKE 600 last?
A single AA battery will provide approximately 150 hours of operating time.