You can only sound better if you hear yourself better. Wireless monitoring is taken to the next level of perfection with the Sennheiser G3 monitoring system. New pass-through sockets for the audio signal enable the audio feed from a console to be routed to other devices in the chain, simplifying setup. The enhanced audio frequency response of 25 to 15,000 Hz means the sound the performers hear is the most realistic and life-like a wireless monitor system has ever had to offer.
Sturdy metal housing
42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
Enhanced frequency bank system with up to 16 compatible frequencies
Ethernet port for connecting to the Wireless Systems Manager (WSM) software for control via computer - this delivers a good overview of monitoring and professional data management for multi-channel systems
Pilot tone squelch for eliminating RF interference when transmitter is turned off
Enhanced AF frequency range
Increased range for audio sensitivity
Wireless synchronization of receiver parameter from transmitter
User-friendly menu operation with more control options
Illuminated graphic display
Auto-Lock function avoids accidental changing of settings
HDX compander for crystal-clear sound
Wide range of accessories adapts the system to any requirement
Information on the frequency presets used in the ew 300 IEM G3 series devices. Range A: 516 - 558 MHz
Information on the frequency presets used in the ew 300 IEM G3 series devices. Range B: 626 - 668 MHz
Information on the frequency presets used in the ew 300 IEM G3 series devices. Range C: 734 - 776 MHz
Information on the frequency presets used in the ew 300 IEM G3 series devices. Range D: 780 - 822 MHz
Information on the frequency presets used in the ew 300 IEM G3 series devices. Range E: 823 - 865 MHz
Information on the frequency presets used in the ew 300 IEM G3 series devices. Range G: 566 - 608 MHz
Information on the frequency presets used in the ew G3 series devices. Range A1: 470 - 516 MHz
EC Declaration of Conformity ew 300 IEM G3: SR 300 IEM G3, EK 300 IEM G3, AC 3, NT 2-3 and NT 3-1
To help select an appropriate operating frequency range for wireless microphones and wireless IEM systems for your geographical area we offer a tool on our website called the Frequency Finder: (http://en-us.sennheiser.com/service-support-frequency-finder).
From the control panel in the upper left corner of the page type in your zip code and click on your town or city from the pop-up list. Once the zip code is entered and the town/city selected then click SEND. The Frequency Finder queries the FCC database and reports back a list of broadcast facilities and their relative signal strengths at your location (determined by power and distance).
The results of the Frequency Finder should be interpreted as follows:
- "white" = indicates strong broadcast facility signals that might disrupt your system and would likely cause issues if these frequencies were to be used.
- "yellow" = indicates weak broadcast facility signals that should be able to be worked around to find some available frequencies to use.
- "green" = indicates vacancies (ie: no broadcast facility signals) and should result in plenty of available frequencies to use.
NOTE: Once the Frequency Finder results list has been generated a new drop down menu labelled RANGE will appear just above the RESET and SEND buttons. From the RANGE drop down menu you can select the product range that you are interested in and once a product range is selected the different operating frequency ranges of the selected product range will overlay on the Frequency Finder results list as a pale BLUE HIGHLIGHT so you can see where the frequency ranges fall. From here you can review the Frequency Finder results list to determine what operating frequency range would be optimal for your region.
The default settings of the Frequency Finder are set for general use both indoors and outdoors. If the initial results list doesn't appear to show any available frequencies try changing the "ATT" drop down menu from 30 dB to 40 dB and the color indicators for available frequencies will adjust accordingly.
NOTE: In a vacant television channel you can operate up to 8 wireless microphone systems or about 6 wireless IEM systems.
NOTE: All frequencies above 700MHz are reserved by the government to facilitate the use of internet capable mobile devices. Government regulations prohibit the sale and use of equipment that operates in these frequencies in the United States.
1.) Plug your first mono mix into the left input port on the back of the SR300IEMG3 transmitter, and then plug your second mono mix into the right side input.
2.) Make sure the transmitter is set to stereo mode
3.) Turn on your bodypack receiver and hit the "set" button to enter the menu list
4.) Find the "Mode" option, hit the set button, change the setting to "Focus", and hit the set button again to save it
5.) Scroll until you find "Exit" and hit set to leave the menu screen
6.) Now you are back on the main screen of the pack. from the main screen you can now choose which mix you want to hear by panning left or right with the arrow keys. Hit the down arrow a few times until only mix #1 can be heard, or hit the up arrow a few times until only mix #2 can be heard. The arrows act as a crossfader between the two sources.
7.) There is no limit to how many receiver packs can tune in to these 2 mono mixes you are transmitting, so if you have additional packs just set them to the same frequency and repeat steps 3-6 above.
8.) Just be aware that there may be a small amount of bleed from one channel into the other during quiet passages.